What are the precautions for the installation of LED light belt

Note for installation of LED light belt: wiring method of LED light belt. The general voltage of LED light belt is DC 12V, so switching power supply is required. The size of power supply depends on the power and connection length of LED light belt. The wiring of the monochromatic 5050 SMD LED light strip is to distinguish the positive and negative poles. Generally, we provide the welded power plug and plug it directly into the power supply of the light belt provided by us. Then, all the input power supply of the LED light belt are connected in parallel, and the power supply is supplied by the main switch power supply. LED light belt installation notes: controller connection mode led Racer belt and RGB slide strip need to use the controller to achieve the variable effect, when wiring.

Light belt lighting attention

1. The requirements of LED brightness are different due to different occasions and different products. For example, if the LED jewelry cabinet table lamp is placed in some large shopping malls, we will have a higher brightness, which will be attractive, and the same decorative function also has different products such as LED spotlight and LED colorful light belt.

2. Antistatic ability: antistatic ability, antistatic ability of LED, long life, but the price will be higher. Generally, the antistatic voltage should be higher than 700V.

3. Wavelength and color temperature consistent led, color will be consistent, this mass combination of lamps and lanterns is particularly important. Do not produce too big color difference in the same lamp.

4. Leakage current is the current when LED is conducting in reverse direction. We suggest using LED products with smaller leakage current.

5. Waterproof capacity, for outdoor and indoor LED light requirements are not the same.

6. LED luminous angle has a great influence on LED lamps and lanterns. For example, LED fluorescent lamps, we suggest 140-170 degrees. We will not elaborate on others here.

7. LED chip size also determines the LED quality and brightness, we also try to choose a larger chip.


Post time: Jul-21-2020